1326 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
36 :WMEMory<r> Commands
:WMEMory<r>:YSCale
(see page 1428)
Command Syntax
:WMEMory<r>:YSCale <scale>[<suffix>]
<r> ::= 1 to (# ref waveforms) in NR1 format
<scale> ::= vertical units per division in NR3 format
<suffix> ::= {V | mV}
The :WMEMory<r>:YSCale command sets the vertical scale, or units per division,
of the selected reference waveform.
Legal values for the scale are copied from the original source waveform (that is,
the analog channel or math function waveform that was originally saved as a
reference waveform).
Query Syntax
:WMEMory<r>:YSCale?
The :WMEMory<r>:YSCale? query returns the current scale setting for the
specified reference waveform.
Return Format
<scale><NL>
<scale> ::= vertical units per division in NR3 format
See Also • Chapter 36, “:WMEMory<r> Commands,” starting on page 1317
• ":WMEMory<r>:DISPlay" on page 1320
• ":WMEMory<r>:YOFFset" on page 1324
• ":WMEMory<r>:YRANge" on page 1325
• ":WMEMory<r>:SKEW" on page 1323
To Next Page
Loading...
