:SEARch Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1065
:SEARch:SERial:LIN:SYMBolic:FRAMe
(see page 1428)
Command Syntax
:SEARch:SERial:LIN:SYMBolic:FRAMe <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:LIN:SYMBolic:FRAMe command specifies the message to
search for when LIN symbolic data has been loaded (recalled) into the oscilloscope
and the LIN serial search mode is set to FRAMe or FSIGnal.
Query Syntax
:SEARch:SERial:LIN:SYMBolic:FRAMe?
The :SEARch:SERial:LIN:SYMBolic:FRAMe? query returns the specified message.
Return Format
<name><NL>
<name> ::= quotes ASCII string
See Also • ":RECall:LDF[:STARt]" on page 718
• ":SEARch:SERial:LIN:MODE" on page 1061
• ":SEARch:SERial:LIN:SYMBolic:SIGNal" on page 1066
• ":SEARch:SERial:LIN:SYMBolic:VALue" on page 1067
To Next Page
Loading...
