786 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:CAN:DISPlay
(see page 1428)
Command Syntax
:SBUS<n>:CAN:DISPlay <type>
<type> ::= {HEXadecimal | SYMBolic}
The :SBUS<n>:CAN:DISPlay command specifies, when CAN symbolic data is
loaded into the oscilloscope, whether symbolic values (from the DBC file) or
hexadecimal values are displayed in the decode waveform and the Lister window.
Query Syntax
:SBUS<n>:CAN:DISPlay?
The :SBUS<n>:CAN:DISPlay? query returns the CAN decode display type.
Return Format
<type><NL>
<type> ::= {HEX | SYMB}
See Also • ":RECall:DBC[:STARt]" on page 716
To Next Page
Loading...
