Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 37
Message Queue / 1567
(Standard) Event Status Register (ESR) / 1568
(Standard) Event Status Enable Register (ESE) / 1569
Error Queue / 1570
Operation Status Event Register (:OPERegister[:EVENt]) / 1571
Operation Status Condition Register (:OPERegister:CONDition) / 1573
Arm Event Register (AER) / 1574
Overload Event Register (:OVLRegister) / 1575
Hardware Event Event Register (:HWERegister[:EVENt]) / 1576
Hardware Event Condition Register (:HWERegister:CONDition) / 1577
Mask Test Event Event Register (:MTERegister[:EVENt]) / 1578
Clearing Registers and Queues / 1579
Status Reporting Decision Chart / 1580
Example: Checking for Armed Status / 1581
Example: Waiting for IO Operation Complete / 1586
42 Synchronizing Acquisitions
Synchronization in the Programming Flow / 1590
Set Up the Oscilloscope / 1590
Acquire a Waveform / 1590
Retrieve Results / 1590
Blocking Synchronization / 1591
Polling Synchronization With Timeout / 1592
Synchronizing with a Single-Shot Device Under Test (DUT) / 1594
Synchronization with an Averaging Acquisition / 1596
Example: Blocking and Polling Synchronization / 1598
43 More About Oscilloscope Commands
Command Classifications / 1610
Core Commands / 1610
Non-Core Commands / 1610
Obsolete Commands / 1610
To Next Page
Loading...
Need help?
General
