:SEARch Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1037
:SEARch:SERial:CAN:SYMBolic:MESSage
(see page 1428)
Command Syntax
:SEARch:SERial:CAN:SYMBolic:MESSage <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:CAN:SYMBolic:MESSage command specifies the message to
search for when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN serial search mode is set to MESSage or MSIGnal.
Query Syntax
:SEARch:SERial:CAN:SYMBolic:MESSage?
The :SEARch:SERial:CAN:SYMBolic:MESSage? query returns the specified
message.
Return Format
<name><NL>
<name> ::= quotes ASCII string
See Also • ":RECall:DBC[:STARt]" on page 716
• ":SEARch:SERial:CAN:MODE" on page 1031
• ":SEARch:SERial:CAN:SYMBolic:SIGNal" on page 1038
• ":SEARch:SERial:CAN:SYMBolic:VALue" on page 1039
To Next Page
Loading...
