:ACQuire Commands 7
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 275
:ACQuire:SRATe
(see page 1428)
Query Syntax
:ACQuire:SRATe? [MAXimum]
The :ACQuire:SRATe? query returns the current oscilloscope acquisition sample
rate. The sample rate is not directly controllable.
When the MAXimum parameter is used, the oscilloscope's maximum possible
sample rate is returned.
Return Format
<sample_rate><NL>
<sample_rate> ::= sample rate in NR3 format
See Also • "Introduction to :ACQuire Commands" on page 264
• ":ACQuire:POINts" on page 268
To Next Page
Loading...
