450 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
20 :LISTer Commands
:LISTer:REFerence
(see page 1428)
Command Syntax
:LISTer:REFerence <time_ref>
<time_ref> ::= {TRIGger | PREVious}
The :LISTer:REFerence command selects whether the time value for a Lister row is
relative to the trigger or the previous Lister row.
Query Syntax
:LISTer:REFerence?
The :LISTer:REFerence? query returns the Lister time reference setting.
Return Format
<time_ref><NL>
<time_ref> ::= {TRIGger | PREVious}
See Also • "Introduction to :LISTer Commands" on page 447
• ":SBUS<n>:DISPlay" on page 758
• ":LISTer:DATA" on page 448
• ":LISTer:DISPlay" on page 449
To Next Page
Loading...
