Keysight Technologies InfiniiVision MSO-X 4022A

1296 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :WGEN<w> Commands
:WGEN<w>:MODulation:FUNCtion:RAMP:SYMMetry
(see page 1428)
Command Syntax
:WGEN<w>:MODulation:FUNCtion:RAMP:SYMMetry <percent>
<w> ::= 1 in NR1 format
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
The :WGEN<w>:MODulation:FUNCtion:RAMP:SYMMetry command specifies the
amount of time per cycle that the ramp waveform is rising. The ramp modulating
waveform shape is specified with the :WGEN<w>:MODulation:FUNCtion
command.
Query Syntax
:WGEN<w>:MODulation:FUNCtion:RAMP:SYMMetry?
The :WGEN<w>:MODulation:FUNCtion:RAMP:SYMMetry? query returns ramp
symmetry percentage setting.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
See Also • ":WGEN<w>:MODulation:AM:DEPTh" on page 1289
• ":WGEN<w>:MODulation:AM:FREQuency" on page 1290
• ":WGEN<w>:MODulation:FM:DEViation" on page 1291
• ":WGEN<w>:MODulation:FM:FREQuency" on page 1292
• ":WGEN<w>:MODulation:FSKey:FREQuency" on page 1293
• ":WGEN<w>:MODulation:FSKey:RATE" on page 1294
• ":WGEN<w>:MODulation:FUNCtion" on page 1295
• ":WGEN<w>:MODulation:STATe" on page 1298
• ":WGEN<w>:MODulation:TYPE" on page 1299