Keysight Technologies InfiniiVision MSO-X 4022A

:ACQuire Commands 7
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 267
:ACQuire:MODE
(see page 1428)
Command Syntax
:ACQuire:MODE <mode>
<mode> ::= {RTIMe | ETIMe | SEGMented}
The :ACQuire:MODE command sets the acquisition mode of the oscilloscope.
• The :ACQuire:MODE RTIMe command sets the oscilloscope in real time mode.
• The :ACQuire:MODE ETIMe command sets the oscilloscope in equivalent time
mode. Available with 4000 X-Series 1 GHz and 1.5 GHz bandwidth models
only.
• The :ACQuire:MODE SEGMented command sets the oscilloscope in segmented
memory mode.
Query Syntax
:ACQuire:MODE?
The :ACQuire:MODE? query returns the acquisition mode of the oscilloscope.
Return Format
<mode_argument><NL>
<mode_argument> ::= {RTIM | ETIM | SEGM}
See Also • "Introduction to :ACQuire Commands" on page 264
• ":ACQuire:TYPE" on page 276
NOTE
The obsolete command ACQuire:TYPE:REALtime is functionally equivalent to sending
ACQuire:MODE RTIMe; TYPE NORMal.