EasyManua.ls Logo

Keysight Technologies InfiniiVision MSO-X 4022A

Keysight Technologies InfiniiVision MSO-X 4022A
1580 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 3
In This Book
This book is your guide to programming the 4000 X-Series oscilloscopes:
The first few chapters describe how to set up and get started:
Chapter 1, “What's New,” starting on page 37, describes programming
command changes in the latest version of oscilloscope software.
Chapter 2, “Setting Up,” starting on page 61, describes the steps you must take
before you can program the oscilloscope.
Chapter 3, “Getting Started,” starting on page 69, gives a general overview of
oscilloscope program structure and shows how to program the oscilloscope
using a few simple examples.
Chapter 4, “Commands Quick Reference,” starting on page 83, is a brief listing
of the 4000 X-Series oscilloscope commands and syntax.
The next chapters provide reference information on common commands, root level
commands, other subsystem commands, and error messages:
Chapter 5, “Common (*) Commands,” starting on page 197, describes
commands defined by the IEEE 488.2 standard that are common to all
instruments.
Chapter 6, “Root (:) Commands,” starting on page 223, describes commands
that reside at the root level of the command tree and control many of the basic
functions of the oscilloscope.
Chapter 7, “:ACQuire Commands,” starting on page 263, describes commands
for setting the parameters used when acquiring and storing data.
Chapter 8, “:BUS<n> Commands,” starting on page 279, describes commands
that control all oscilloscope functions associated with the digital channels bus
display.
Chapter 9, “:CALibrate Commands,” starting on page 289, describes utility
commands for determining the state of the calibration factor protection button.
Table 1 InfiniiVision 4000 X-Series Oscilloscope Models, Bandwidths, Sample Rates
Bandwidth 200 MHz 350 MHz 500 MHz 1GHz 1.5 GHz
Sample Rate (interleaved,
non-interleaved)
5GSa/s,
2.5 GSa/s
5GSa/s,
2.5 GSa/s
5GSa/s,
2.5 GSa/s
5GSa/s,
2.5 GSa/s
5GSa/s,
2.5 GSa/s
2-Channel + 16 Logic
Channels MSO
MSO-X 4022A MSO-X 4032A MSO-X 4052A
4-Channel + 16 Logic
Channels MSO
MSO-X 4024A MSO-X 4034A MSO-X 4054A MSO-X 4104A MSO-X 4154A
2-Channel DSO DSO-X 4022A DSO-X 4032A DSO-X 4052A
4-Channel DSO DSO-X 4024A DSO-X 4034A DSO-X 4054A DSO-X 4104A DSO-X 4154A

Table of Contents

Related product manuals