Keysight Technologies InfiniiVision MSO-X 4022A

Common (*) Commands 5
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 209
*OPT (Option Identification)
(see page 1428)
Query Syntax
*OPT?
The *OPT? query reports the options installed in the instrument. This query returns
a string that identifies the module and its software revision level.
Return Format
0,0,<license info>
<license info> ::= <All field>, <reserved>, <MSO>, <Xilinx FPGA Probe>,
<Memory>, <Low Speed Serial>, <Automotive Serial>,
<FlexRay Serial>, <Power Measurements>, <RS-232/UART Serial>,
<Segmented Memory>, <Mask Test>, <reserved>, <Bandwidth>,
<reserved>, <reserved>, <reserved>, <I2S Serial>, <reserved>,
<Educator's Kit>, <Waveform Generator>, <MIL-1553/ARINC 429 Serial>,
<Extended Video>, <Advanced Math>, <reserved>, <reserved>,
<reserved>, <Digital Voltmeter>, <reserved>, <Spectrum Visualizer>,
<reserved>, <USB 2.0 Low/Full Speed>, <USB 2.0 High Speed>,
<USB 2.0 Signal Quality Analysis>, <Remote Command Logging>,
<reserved>, <SENT Serial>, <CAN FD Serial>, <CXPI Serial>,
<NFC Trigger>
<All field> ::= {0 | All}
<reserved> ::= 0
<MSO> ::= {0 | MSO}
<Xilinx FPGA Probe> ::= {0 | FPGAX}
<Memory> ::= {0 | MEMUP}
<Low Speed Serial> ::= {0 | EMBD}
<Automotive Serial> ::= {0 | AUTO}
<FlexRay Serial> ::= {0 | FLEX}
<Power Measurements> ::= {0 | PWR}
<RS-232/UART Serial> ::= {0 | COMP}
<Segmented Memory> ::= {0 | SGM}
<Mask Test> ::= {0 | MASK}
<Bandwidth> ::= {0 | BW50}
<I2S Serial> ::= {0 | AUDIO}
<Educator's Kit> ::= {0 | EDK}
<Waveform Generator> ::= {0 | WAVEGEN}
<MIL-1553/ARINC 429 Serial> ::= {0 | AERO}
<Extended Video> ::= {0 | VID}
<Advanced Math> ::= {0 | ADVMATH}