:CHANnel<n> Commands 10
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 313
:CHANnel<n>:PROBe:ID
(see page 1428)
Query Syntax
:CHANnel<n>:PROBe:ID?
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:PROBe:ID? query returns the type of probe attached to the
specified oscilloscope channel.
Return Format
<probe id><NL>
<probe id> ::= unquoted ASCII string up to 11 characters
Some of the possible returned values are:
• 1131A
• 1132A
• 1134A
• 1147A
• 1153A
• 1154A
• 1156A
• 1157A
• 1158A
• 1159A
•AutoProbe
• E2621A
• E2622A
• E2695A
• E2697A
• HP1152A
• HP1153A
•NONE
•Probe
• Unknown
• Unsupported
See Also • "Introduction to :CHANnel<n> Commands" on page 303
To Next Page
Loading...
