:SEARch Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1079
:SEARch:SERial:SPI:PATTern:DATA
(see page 1428)
Command Syntax
:SEARch:SERial:SPI:PATTern:DATA <string>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
The :SEARch:SERial:SPI:PATTern:DATA command specifies the data value when
searching for SPI events.
The width of the data value is specified using the
:SEARch:SERial:SPI:PATTern:WIDTh command.
Query Syntax
:SEARch:SERial:SPI:PATTern:DATA?
The :SEARch:SERial:SPI:PATTern:DATA? query returns the current data value
setting.
Return Format
<string><NL>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
See Also • Chapter 30, “:SEARch Commands,” starting on page 993
• ":SEARch:SERial:SPI:PATTern:WIDTh" on page 1080
To Next Page
Loading...
