332 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
10 :CALibrate Commands
Introduction to
:CALibrate
Commands
The CALibrate subsystem provides utility commands for:
• Determining the state of the calibration factor protection switch
(CAL PROTECT).
• Saving and querying the calibration label string.
• Reporting the calibration time and date.
• Reporting changes in the temperature since the last calibration.
• Starting the user calibration procedure.
n/a :CALibrate:TEMPeratur
e? (see page 340)
<return value> ::= degrees C
delta since last cal in NR3
format
n/a :CALibrate:TIME? (see
page 341)
<return value> ::=
<hours>,<minutes>,<seconds>; all
in NR1 format
Table 96 :CALibrate Commands Summary (continued)
Command Query Options and Query Returns
To Next Page
Loading...
Need help?
General
