Keysight Technologies InfiniiVision MSO-X 4022A

1294 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :WGEN<w> Commands
:WGEN<w>:MODulation:FSKey:RATE
(see page 1428)
Command Syntax
:WGEN<w>:MODulation:FSKey:RATE <rate>
<w> ::= 1 in NR1 format
<rate> ::= FSK modulation rate in Hz in NR3 format
The :WGEN<w>:MODulation:FSKey:RATE command specifies the rate at which the
output frequency "shifts".
The FSK rate specifies a digital square wave modulating signal.
Query Syntax
:WGEN<w>:MODulation:FSKey:RATE?
The :WGEN<w>:MODulation:FSKey:RATE? query returns the FSK rate setting.
Return Format
<rate><NL>
<rate> ::= FSK modulation rate in Hz in NR3 format
See Also • ":WGEN<w>:MODulation:AM:DEPTh" on page 1289
• ":WGEN<w>:MODulation:AM:FREQuency" on page 1290
• ":WGEN<w>:MODulation:FM:DEViation" on page 1291
• ":WGEN<w>:MODulation:FM:FREQuency" on page 1292
• ":WGEN<w>:MODulation:FSKey:FREQuency" on page 1293
• ":WGEN<w>:MODulation:FUNCtion" on page 1295
• ":WGEN<w>:MODulation:FUNCtion:RAMP:SYMMetry" on page 1296
• ":WGEN<w>:MODulation:STATe" on page 1298
• ":WGEN<w>:MODulation:TYPE" on page 1299