Keysight Technologies InfiniiVision MSO-X 4022A

What's New 1
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 43
What's New in Version 4.06
New features in version 4.06 of the InfiniiVision 4000 X-Series oscilloscope
software are:
• The Control Loop Response (Bode) power analysis now lets you select a phase
plot as well as a gain plot.
• The ISO standard for CAN FD is now supported.
• Up to 10 annotations are supported.
More detailed descriptions of the new and changed commands appear below.
New Commands
Changed
Commands
Command Description
:POWer:CLResponse:VIEW When the Control Loop Response (Bode) power analysis is
selected, this command selects whether to display a gain or
phase plot.
:SBUS<n>:CAN:FDSTandard
(see page 788)
Lets you pick the standard that will be used when decoding or
triggering on FD frames, ISO, or non-ISO.
Command Differences
:DISPlay:ANNotation<n> (see
page 362)
You can now define up to 10 annotations.
:DISPlay:ANNotation<n>:BACK
ground (see page 363)
:DISPlay:ANNotation<n>:COLor
(see page 364)
:DISPlay:ANNotation<n>:TEXT
(see page 365)
:DISPlay:ANNotation<n>:X1Pos
ition (see page 366)
:DISPlay:ANNotation<n>:Y1Pos
ition (see page 367)
:SBUS<n>:CAN:TRIGger (see
page 794)
Has some description changes related to the CAN FD ISO support
changes.