1224 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
33 :TRIGger Commands
:TRIGger:TV:UDTV:PGTHan
(see page 1428)
Command Syntax
:TRIGger:TV:UDTV:PGTHan <min_time>
<min_time> ::= seconds in NR3 format
The :TRIGger:TV:UDTV:PGTHan command specifies the "greater than the sync
pulse width" time in the Generic video trigger. This setting allows oscilloscope
synchronization to the vertical sync.
Query Syntax
:TRIGger:TV:UDTV:PGTHan?
The :TRIGger:TV:UDTV:PGTHan query returns the "greater than the sync pulse
width" time setting.
Return Format
<min_time><NL>
<min_time> ::= seconds in NR3 format
See Also • ":TRIGger:TV:STANdard" on page 1220
• ":TRIGger:TV:UDTV:ENUMber" on page 1221
• ":TRIGger:TV:UDTV:HSYNc" on page 1222
To Next Page
Loading...
