:FUNCtion<m> Commands 18
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 395
:FUNCtion<m>:BUS:CLOCk
(see page 1428)
Command Syntax
:FUNCtion<m>:BUS:CLOCk <source>
<m> ::= 1 to (# math functions) in NR1 format
<source> ::= {DIGital<d>}
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :FUNCtion<m>:BUS:CLOCk command selects the clock signal source for the
Chart Logic Bus State operation.
Query Syntax
:FUNCtion<m>:BUS:CLOCk?
The :FUNCtion<m>:BUS:CLOCk query returns the source selected for the clock
signal.
Return Format
<source><NL>
<source> ::= {DIGital<d>}
<d> ::= 0 to (# digital channels - 1) in NR1 format
See Also • ":FUNCtion<m>:OPERation" on page 416
To Next Page
Loading...
