742 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :SAVE Commands
:SAVE:RESults:FORMat:MASK
(see page 1428)
Command Syntax
:SAVE:RESults:FORMat:MASK {{0 | OFF} | {1 | ON}}
The :SAVE:RESults:FORMat:MASK command specifies whether mask statistics will
be included when analysis results are saved.
Analysis results are saved using the :SAVE:RESults:[STARt] command.
Other :SAVE:RESults:FORMat commands specify whether other types of analysis
results are also saved.
When multiple types of analysis results are saved, they are all saved to the same
file and separated by a blank line.
Query Syntax
:SAVE:RESults:FORMat:MASK?
The :SAVE:RESults:FORMat:MASK? query returns whether mask statistics will be
included when analysis results are saved.
Return Format
<off_on><NL>
{0 | 1}
See Also • ":SAVE:RESults:[STARt]" on page 740
• ":SAVE:RESults:FORMat:CURSor" on page 741
• ":SAVE:RESults:FORMat:MEASurement" on page 743
• ":SAVE:RESults:FORMat:SEARch" on page 744
• ":SAVE:RESults:FORMat:SEGMented" on page 745
To Next Page
Loading...
