652 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:HARMonics:STATus
(see page 1428)
Query Syntax
:POWer:HARMonics:STATus?
The :POWer:HARMonics:STATus query returns the overall pass/fail status of the
current harmonics analysis.
Return Format
<status> ::= {PASS | FAIL | UNTested}
See Also • ":POWer:HARMonics:RUNCount" on page 650
• ":POWer:HARMonics:FAILcount" on page 645
• ":POWer:HARMonics:APPLy" on page 642
• ":POWer:HARMonics:DATA" on page 643
• ":POWer:HARMonics:DISPlay" on page 644
• ":POWer:HARMonics:LINE" on page 646
• ":POWer:HARMonics:POWerfactor" on page 647
• ":POWer:HARMonics:STANdard" on page 651
• ":POWer:HARMonics:THD" on page 653
To Next Page
Loading...
