Keysight Technologies InfiniiVision MSO-X 4022A

362 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
15 :DISPlay Commands
:DISPlay:ANNotation<n>
(see page 1428)
Command Syntax
:DISPlay:ANNotation<n> <setting>
<setting> ::= {{1 | ON} | {0 | OFF}}
<n> ::= an integer from 1 to 10 in NR1 format.
The :DISPlay:ANNotation<n> command turns the annotation on and off. When on,
the annotation appears in the upper left corner of the oscilloscope's display.
The annotation is useful for documentation purposes, to add notes before
capturing screens.
Query Syntax
:DISPlay:ANNotation<n>?
The :DISPlay:ANNotation<n>? query returns the annotation setting.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also • ":DISPlay:ANNotation<n>:TEXT" on page 365
• ":DISPlay:ANNotation<n>:COLor" on page 364
• ":DISPlay:ANNotation<n>:BACKground" on page 363
• ":DISPlay:ANNotation<n>:X1Position" on page 366
• ":DISPlay:ANNotation<n>:Y1Position" on page 367
• "Introduction to :DISPlay Commands" on page 360