Keysight Technologies InfiniiVision MSO-X 4022A - RCL (Recall)

Common (*) Commands 5
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 211
*RCL (Recall)
(see page 1428)
Command Syntax
*RCL <value>
<value> ::= {0|1|2|3|4|5|6|7|8|9}
The *RCL command restores the state of the instrument from the specified
save/recall register.
See Also • "Introduction to Common (*) Commands" on page 200
• "*SAV (Save)" on page 215