:POWer Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 685
:POWer:SIGNals:DURation:MODulation
(see page 1428)
Command Syntax
:POWer:SIGNals:DURation:MODulation <value>[suffix]
<value> ::= value in NR3 format
[suffix] ::= {s | ms | us | ns}
The :POWer:SIGNals:DURation:MODulation command specifies the duration of
the modulation analysis.
Query Syntax
:POWer:SIGNals:DURation:MODulation?
The :POWer:SIGNals:DURation:MODulation query returns the set duration time
value.
Return Format
<value><NL>
<value> ::= value in NR3 format
See Also • ":POWer:MODulation:APPLy" on page 658
• ":POWer:SIGNals:AUTosetup" on page 681
• ":POWer:SIGNals:IEXPected" on page 690
• ":POWer:SIGNals:OVERshoot" on page 691
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 698
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 699
To Next Page
Loading...
