1114 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SYSTem Commands
:SYSTem:RLOGger:DESTination
(see page 1428)
Command Syntax
:SYSTem:RLOGger:DESTination <dest>
<dest> ::= {FILE | SCReen | BOTH}
The :SYSTem:RLOGger:DESTination command specifies whether remote
commands are logged to a text file (on a connected USB storage device), logged
to the screen, or both.
Query Syntax
:SYSTem:RLOGger:DESTination?
The :SYSTem:RLOGger:DESTination? query returns the remote command logging
destination.
Return Format
<dest><NL>
<dest> ::= {FILE | SCR | BOTH}
See Also • ":SYSTem:RLOGger" on page 1113
• ":SYSTem:RLOGger:DISPlay" on page 1115
• ":SYSTem:RLOGger:FNAMe" on page 1116
• ":SYSTem:RLOGger:STATe" on page 1117
• ":SYSTem:RLOGger:TRANsparent" on page 1118
• ":SYSTem:RLOGger:WMODe" on page 1119
If the destination is changed while remote command logging is running, remote command
logging is turned off.
To Next Page
Loading...
