:POWer Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 701
:POWer:SLEW:SOURce
(see page 1428)
Command Syntax
:POWer:SLEW:SOURce <source>
<source> ::= {V | I}
The :POWer:SLEW:SOURce command selects either the voltage source or the
current source as the source for the slew rate analysis.
Query Syntax
:POWer:SLEW:SOURce?
The :POWer:SLEW:SOURce query returns the selected source for the slew rate
analysis.
Return Format
<source><NL>
<source> ::= {V | I}
See Also • ":POWer:SLEW:APPLy" on page 700
To Next Page
Loading...
