:MTESt Commands 24
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 593
:MTESt:COUNt:WAVeforms
(see page 1428)
Query Syntax
:MTESt:COUNt:WAVeforms?
The :MTESt:COUNt:WAVeforms? query returns the total number of waveforms
acquired in the current mask test run.
Return Format
<count><NL>
<count> ::= number of waveforms in NR1 format.
See Also • "Introduction to :MTESt Commands" on page 581
• ":MTESt:COUNt:FWAVeforms" on page 590
• ":MTESt:COUNt:TIME" on page 592
• ":MTESt:COUNt:RESet" on page 591
Example Code • "Example Code" on page 581
To Next Page
Loading...
