Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 7
Contents
In This Book / 3
1 What's New
What's New in Version 4.08 / 38
What's New in Version 4.07 / 41
What's New in Version 4.06 / 43
What's New in Version 4.05 / 44
What's New in Version 4.00 / 46
What's New in Version 3.20 / 49
What's New in Version 3.10 / 51
What's New in Version 3.01 / 52
Version 3.00 at Introduction / 53
Command Differences From 3000 X-Series Oscilloscopes / 54
2 Setting Up
Step 1. Install Keysight IO Libraries Suite software / 62
Step 2. Connect and set up the oscilloscope / 63
Using the USB (Device) Interface / 63
Using the LAN Interface / 64
Step 3. Verify the oscilloscope connection / 65
3 Getting Started
Basic Oscilloscope Program Structure / 70
Initializing / 70
Capturing Data / 70
Analyzing Captured Data / 71
To Next Page
Loading...
