Keysight Technologies InfiniiVision MSO-X 4022A

:SYSTem Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1113
:SYSTem:RLOGger
(see page 1428)
Command Syntax
:SYSTem:RLOGger <setting>[,<file_name>[,<write_mode>]]
<setting> ::= {{0 | OFF} | {1 | ON}}
<file_name> ::= quoted ASCII string
<write_mode> ::= {CREate | APPend}
The :SYSTem:RLOGger command enables or disables remote command logging,
optionally specifying the log file name and write mode.
See Also • ":SYSTem:RLOGger:DESTination" on page 1114
• ":SYSTem:RLOGger:DISPlay" on page 1115
• ":SYSTem:RLOGger:FNAMe" on page 1116
• ":SYSTem:RLOGger:STATe" on page 1117
• ":SYSTem:RLOGger:TRANsparent" on page 1118
• ":SYSTem:RLOGger:WMODe" on page 1119