702 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
26 :POWer Commands
:POWer:SWITch:APPLy
(see page 1428)
Command Syntax
:POWer:SWITch:APPLy
The :POWer:SWITch:APPLy command applies the switching loss analysis using the
conduction calculation method, V reference, and I reference settings.
See Also • ":POWer:SWITch:CONDuction" on page 703
• ":POWer:SWITch:IREFerence" on page 704
• ":POWer:SWITch:RDS" on page 705
• ":POWer:SWITch:VCE" on page 706
• ":POWer:SWITch:VREFerence" on page 707
• ":MEASure:ELOSs" on page 564
• ":MEASure:PLOSs" on page 571
To Next Page
Loading...
