:POWer Commands 26
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 641
:POWer:ENABle
(see page 1428)
Command Syntax
:POWer:ENABle {{0 | OFF} | {1 | ON}}
The :POWer:ENABle command enables or disables power analysis.
Query Syntax
:POWer:ENABle?
The :POWer:ENABle query returns a 1 or a 0 showing whether power analysis is
enabled or disabled, respectively.
Return Format
{0 | 1}
See Also • Chapter 23, “:MEASure Power Commands,” starting on page 555
To Next Page
Loading...
