:WGEN<w> Commands 35
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1273
In the :WGEN<w> commands, the <w> can be 1 or 2, and :WGEN is equivalent to
:WGEN1
Reporting the Setup
Use :WGEN<w>? to query setup information for the WGEN<w> subsystem.
Return Format
The following is a sample response from the :WGEN? query. In this case, the query
was issued following the *RST command.
:WGEN1:FUNC SIN;OUTP 0;FREQ +1.0000E+03;VOLT +500.0E-03;VOLT:OFFS
+0.0E+00;:WGEN1:OUTP:LOAD ONEM
To Next Page
Loading...
