Keysight Technologies InfiniiVision MSO-X 4022A

1328 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
37 Obsolete and Discontinued Commands
:CHANnel:THReshold (see
page 1336)
:POD<n>:THReshold (see
page 617) or
:DIGital<d>:THReshold (see
page 357)
:CHANnel2:SKEW (see
page 1337)
:CHANnel<n>:PROBe:SKEW
(see page 316)
:CHANnel<n>:INPut (see
page 1338)
:CHANnel<n>:IMPedance (see
page 307)
:CHANnel<n>:PMODe (see
page 1339)
none
:DISPlay:CONNect (see
page 1340)
:DISPlay:VECTors (see
page 376)
:DISPlay:ORDer (see
page 1341)
none
:ERASe (see page 1342) :DISplay:CLEar (see page 368)
:EXTernal:PMODe (see
page 1343)
none
FUNCtion1, FUNCtion2 :FUNCtion Commands (see
page 389)
ADD not included
:FUNCtion Commands :FUNCtion2 Commands (see
page 389)
:FUNCtion commands (with no
<m> number) map to
:FUNCtion2. This allows legacy
programs to work without
change.
:FUNCtion:GOFT:OPERation
(see page 1344)
:FUNCtion1:OPERation (see
page 416)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce1 (see
page 1345)
:FUNCtion1:SOURce1 (see
page 424)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce2 (see
page 1346)
:FUNCtion1:SOURce2 (see
page 426)
GOFT maps to FUNCtion1.
:FUNCtion:SOURce (see
page 1347)
:FUNCtion:SOURce1 (see
page 424)
Obsolete command has ADD,
SUBTract, and MULTiply
parameters; current command
has GOFT parameter.
:FUNCtion:VIEW (see
page 1348)
:FUNCtion:DISPlay (see
page 401)
:HARDcopy:DESTination (see
page 1349)
:HARDcopy:FILename (see
page 1350)
Obsolete Command Current Command Equivalent Behavior Differences