:FUNCtion<m> Commands 18
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 419
<operation> ::= {ADD | SUBT | MULT | DIV | INT | DIFF | FFT | FFTP
| SQRT | MAGN | ABS | SQU | LN | LOG | EXP | TEN | LOWP | HIGH
| AVER | SMO | ENV | LIN | MAX | MIN | PEAK | MAXH | MINH | TREN
| BTIM | BST}
See Also • "Introduction to :FUNCtion<m> Commands" on page 393
• ":FUNCtion<m>:SOURce1" on page 424
• ":FUNCtion<m>:SOURce2" on page 426
• ":FUNCtion<m>:INTegrate:IOFFset" on page 412
• ":FUNCtion<m>[:FFT]:SPAN" on page 407
• ":FUNCtion<m>[:FFT]:CENTer" on page 402
• ":FUNCtion<m>[:FFT]:PHASe:REFerence" on page 406
• ":FUNCtion<m>[:FFT]:VTYPe" on page 408
• ":FUNCtion<m>[:FFT]:WINDow" on page 409
• ":FUNCtion<m>:LINear:GAIN" on page 413
• ":FUNCtion<m>:LINear:OFFSet" on page 414
• ":FUNCtion<m>:FREQuency:LOWPass" on page 411
• ":FUNCtion<m>:FREQuency:HIGHpass" on page 410
• ":FUNCtion<m>:AVERage:COUNt" on page 394
• ":FUNCtion<m>:TRENd:MEASurement" on page 427
• ":FUNCtion<m>:BUS:YINCrement" on page 397
• ":FUNCtion<m>:BUS:YORigin" on page 398
• ":FUNCtion<m>:BUS:YUNits" on page 399
• ":FUNCtion<m>:BUS:CLOCk" on page 395
• ":FUNCtion<m>:BUS:SLOPe" on page 396
To Next Page
Loading...
