1 Power Meter Remote Operation
100 N1911A/1912A P-Series Power Meters Programming Guide
<NRf> Definition
Throughout this document <NRf> is used to denote a flexible numeric
representation. For example: +200; –56; +9.9E36. Refer to section 7.7.2.1 of IEEE
488.2 for further details.
<NR1> Definition
Throughout this document <NR1> numeric response data is defined as:
Figure 1-13 Format of <NR1>
For example:
– 146
– +146
– –12345
Refer to section 8.7.2 of IEEE 488.2 for further details.
<NR2> Definition
Throughout this document <NR2> numeric response data is defined as:
Figure 1-14 Format of <NR2>
For example:
– 12.3
– +1.2345
– –0.123
Refer to section 8.7.3 of IEEE 488.2 for further details.
To Next Page
Loading...
