Keysight N1911A

10 SENSe Subsystem
452 N1911A/1912A P-Series Power Meters Programming Guide
SENSe[1]|SENSe2:TRACe:TIME <numeric_value>
This command sets the duration of the trace for a P-Series sensor and a E9320
sensors set to NORMal mode. To set the E9320 sensor to NORMal mode, refer to the
command “[SENSe[1]]|SENSe2:DETector:FUNCtion <character_data>” on
page 414.
Syntax
Parameters
Example
Item Description/Default Range of Values
numeric_value The duration of the trace in seconds.
–
DEF: the default value is 100 µs.
Units are resolved to 1 ns.
20 ns to 1 s
DEF
SENS2:TRAC:TIME 0.5 This command sets the duration of the trace
to 0.5 seconds for Channel B.
SENS
1
SENS2
:
numeric_value
DEF
Space
TRAC
:TIME
?