Keysight N1911A

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 407
[SENSe[1]]|SENSe2:CORRection:FDOFfset|GAIN4[:INPut][:MAGNit
ude]?
This command is used to return the frequency dependent offset currently being
applied.
Syntax
Example
Reset Condition
On reset, the frequency dependent offset is not affected.
CORR:GAIN4? This command queries the current frequency
dependent offset being applied to Channel A.
SENS
1
:GAIN4
CORR
SENS2
:
:FDOFfset
:INP
:MAG
?