Keysight N1911A

SENSe Subsystem 10
N1911A/1912A P-Series Power Meters Programming Guide 385
[SENSe[1]]|SENSe2:BANDwidth|BWIDth:VIDeo <character_data>
This command sets the sensor bandwidth on a P-Series or an E9320 Series
sensor.
Syntax
Parameters
Values for HIGH, MEDIUM, LOW and OFF are sensor dependant as shown in the
following table:
[a] At 3.0 dB roll off point.
Item Description/Default Range of Values
character_data Defines the sensor bandwidth. HIGH
MEDium
LOW
OFF
SENS
1
:VID
BAND
SENS2
:
BWID
Space
?
character_data
Sensor
Video Band wid th Settings
LOW MEDium HIGH OFF
E9321A
E9325A
30 kHz 100 kHz 300 kHz
300 kHz
[a]
E9322A
E9326A
100 kHZ 300 kHz 1.5 MHz
1.5 MHz
[a]
E9323A
E9327A
300 kHz 1.5 MHz 5 MHz
5 MHz
[a]
N1920A
N1921A
5 MHz 15 MHz 30 MHz 30 MHz