PSTatistic Subsystem 9
N1911A/1912A P-Series Power Meters Programming Guide 349
PSTatistic[1]|2:CCDF:PROBability? <numeric_value>
This command is used to return the probability at the specified power level.
Syntax
Parameters
This command is only applicable when P-Series sensors are present and the
following conditions are met:
– Free run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
PST
2
1
:CCDF
?
:PROB
numeric_value
space
Item Description/Default Range of Values
numeric_value The power level at the queried probability.
– Maximum value: 50.00 dB
– Minimum value: 0.00 dB
0.00 to 50.0
To Next Page
Loading...
