Keysight N1911A

N1911A/1912A P-Series Power Meters
Programming Guide
211
4 CALibration Subsystem
CALibration Subsystem 212
CALibration[1]|2[:ALL] 214
CALibration[1]|2[:ALL]? 216
CALibration[1]|2:AUTO [ONCE|ON|OFF|0|1] 218
CALibration[1]|2:RCALibration <boolean> 221
CALibration[1]|2:RCFactor <numeric_value> 223
CALibration[1]|2:ZERO:AUTO [ONCE|ON|OFF|0|1] 225
CALibration[1]|2:ZERO:NORMal:AUTO <boolean> 227
This chapter explains how the CALibration command subsystem is used to zero
and calibrate the power meter.