15 SERVice Subsystem
720 N1911A/1912A P-Series Power Meters Programming Guide
SERVice:SENSor[1]|2:SNUMber?
This query returns the serial number for P-Series, E-Series sensors and N8480
Series sensors. Serial number information is stored in the sensor’s EEPROM.
Syntax
Example
Error Messages
– If no sensor is connected, error –241, “Hardware missing” occurs.
– If a a sensor other than a P-Series, N8480 Series or E-Series power sensor is
connected, error –241 “Hardware missing” occurs.
SERV:SENS2:SNUM? This query returns the serial number of the
P-Series, E-Series sensor or N8480 Series
sensor connected to Channel B.
To Next Page
Loading...
