Keysight N1911A

10 SENSe Subsystem
460 N1911A/1912A P-Series Power Meters Programming Guide
SENSe[1]|2:TRACe:X:SCALe:PDIV <numeric_value>
This command is used to set the X Scale value (per division) for the selected trace.
Syntax
Parameters
Example
NOTE
This command is only applicable when N192x or E932x sensor is present and
trigger acquisition mode is selected.
Item Description/Default Range of Values
numeric_value The numeric value for X-axis scale. 2 ns to 0.1 s
SENS:TRAC:X:SCAL:PDIV 0.02 This command sets the X Scale value of
Channel A to 0.02 step.
SENS2:TRAC:X:SCAL:PDIV 0.05 This command sets the X Scale value of
Channel B to 0.05 step.
1
2
Space
?
:X
SENS
:TRAC
:SCAL
:PDIV
numeric_value