Keysight N1911A

To Next Page

To Previous Page

N1911A/1912A P-Series Power Meters

Programming Guide

611

13 TRACe Subsystem

TRACe Subsystem 612

TRACe[1]|2[:DATA]? <character_data> 614

TRACe[1]|2:DEFine:DURation:REFerence<numeric_value> 616

TRACe[1]|2:DEFine:TRANsition:REFerence <numeric_value>,

<numeric_value> 618

TRACe[1]|2:MEASurement:INSTant:REFerence? <numeric_value> 620

TRACe[1]|2:MEASurement:PULSe[1]|...|10:DCYCle? 621

TRACe[1]|2:MEASurement:PULSe[1]|...|10:DURation? 622

TRACe[1]|2:MEASurement:PULSe[1]|...|10:PERiod? 624

TRACe[1]|2:MEASurement:PULSe[1]|...|10:SEParation? 626

TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:DURation? 628

TRACe[1]|2:MEASurement:TRANsition[1]|...|10:NEGative:OCCurrence? 629

TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:DURation? 630

TRACe[1]|2:MEASurement:TRANsition[1]|...|10:POSitive:OCCurrence? 631

TRACe[1]|2:MEASurement:REFerence? <numeric_value> 632

TRACe[1]|2:STATe <boolean> 634

TRACe[1]|2:UNIT <character_data> 636

This chapter explains how to use the TRACe command subsystem to configure and

read back the measured power trace.

Other manuals for Keysight N1911A