14 TRIGger Subsystem
640 N1911A/1912A P-Series Power Meters Programming Guide
TRIGger Subsystem
The TRIGger subsystem is used to synchronize device actions with events. It
includes the ABORt, INITiate and TRIGger commands. These are all at the root
level in the command hierarchy but they are grouped here because of their close
functional relationship.
Keyword Parameter Form Notes Page
ABORt[1]|2 [no query]
[non-SCPI]
page 642
INITiate[1]|2
:CONTinuous <boolean> page 644
[:IMMediate] [no query] page 646
INITiate
:CONTinuous
:ALL <boolean> page 647
:SEQuence[1]|2 <boolean> page 649
[:IMMediate]
:ALL [no query] page 651
:SEQuence[1]|2 [no query] page 652
TRIGger[1]|2
:DELay
:AUTO <boolean> page 654
[:IMMediate] [no query] page 656
:SOURce BUS|EXTernal|HOLD|
IMMediate|INTernal[[1]|2]
page 657
TRIGger
[:SEQuence]
:DELay <numeric_value> page 660
:HOLDoff <numeric_value> page 662
To Next Page
Loading...
