SYSTem Subsystem 12
N1911A/1912A P-Series Power Meters Programming Guide 511
SYSTem:COMMunicate:LAN:SMASk <character_data>
This command sets the subnet mask of the power meter.
Syntax
Parameters
Example
Query
SYSTem:COMMunicate:LAN:SMASk?
The query returns the current setting of the LAN subnet mask.
SYST
:COMM
:LAN
:SMAS
Space
?
character_data
Item Description Range of Values
character_data Numeric character values for the address. Up to 15
characters, formatted as follows: A.B.C.D
where A, B, C, D = 0 to 255
0 to 255 (no embedded spaces)
SYST:COMM:LAN:SMAS
‘255.255.248.0’
This command sets the subnet mask to
255.255.248.0.
To Next Page
Loading...
