Keysight N1911A

N1911A/1912A P-Series Power Meters
Programming Guide
229
5 DISPlay Subsystem
DISPlay Subsystem 230
DISPlay:ENABle <boolean> 231
DISPlay:SCReen:FORMat <character_data> 232
DISPlay[:WINDow[1]|2] Commands 234
DISPlay[:WINDow[1]|2]:ANALog Commands 235
DISPlay[:WINDow[1]|2]:ANALog:LOWer <numeric_value> 236
DISPlay[:WINDow[1]|2]:ANALog:UPPer <numeric_value> 239
DISPlay[:WINDow[1]|2]:FORMat <character_data> 242
DISPlay[:WINDow[1]|2]:METer Commands 245
DISPlay[:WINDow[1]|2]:METer:LOWer <numeric_value> 246
DISPlay[:WINDow[1]|2]:METer:UPPer <numeric_value> 249
DISPlay[:WINDow[1]|2][:NUMeric[1]|2]:RESolution <numeric_value> 252
DISPlay[:WINDow[1]|2]:SELect[1]|2 254
DISPlay[:WINDow[1]|2]:STATe <boolean> 256
DISPlay[:WINDow[1]|2]:TRACe:FEED <character_data> 258
This chapter explains how the DISPlay subsystem is used to control the selection
and presentation of the windows used on the power meter’s display.