Keysight N1911A

SYSTem Subsystem 12
N1911A/1912A P-Series Power Meters Programming Guide 495
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <numeric_value>
This command sets the GPIB address of the power meter.
Syntax
Parameters
Example
Item Description/Default Range of Values
numeric_value A numeric value for the address.
– DEF: the default value is 13
–MIN: 0
–MAX: 30
0 to 30
DEF
MIN
MAX
SYST:COMM:GPIB:ADDR 13 This command sets the GPIB address to 13.
SYST
:COMM
:GPIB
:SELF
:ADDR
Space
?
numeric_value
DEF
MIN
MAX
MIN
MAX
Space