Keysight N1911A

PSTatistic Subsystem 9
N1911A/1912A P-Series Power Meters Programming Guide 341
PSTatistic[1]|2:CCDF:COUNt <numeric_value>
This command is used to set CCDF cummulative counts for Channel A or Channel
B. The increment step for the cummulative counts is 100 M.
Syntax
Parameters
Example
NOTE
This command is only applicable when P-Series sensor is present and free-run
acquisition mode is selected. If P-Series sensor is used by the adjacent channel
in a dual channel setup, the same setting will be applied for free-run acquisition
mode.
:CCDF :COUN
numeric_value
Space
?
PST
2
1
Item Description/Default Range of Values
numeric_value The CCDF cummulative counts in numeric value.
– Minimum value: 100 M
– Maximum value: 10 G
100 M to 10 G
PST1:CCDF:COUN 1.2G This command sets the CCDF cummulative
counts for Channel A to 1.2 G.