Keysight N1911A

1 Power Meter Remote Operation
106 N1911A/1912A P-Series Power Meters Programming Guide
Making Measurements on Wireless Communication Standards
The following sections describe typical measurements you may want to make.
They are also described, for front panel operation, in the user’s guide.
The optimum method of measuring these Wireless Communication Standards is
to use the SYSTem:PRESet <character_data> command and use one of the
following values.
– GSM900 -See “GSM900” on page 534 for greater detail.
– EDGE -See “EDGE” on page 537 for greater detail.
– CDMAone -See “CDMAone” on page 542 for greater detail.
– CDMA2000 -See “CDMA2000” on page 546 for greater detail.
– WCDMA -See “W-CDMA” on page 550 for greater detail.
– BLUetooth -See “BLUetooth” on page 554 for greater detail.
– MCPa -See “MCPA” on page 557 for greater detail.
– RADar -See “RADAR” on page 561 for greater detail.
– WL802DOT11A -See “802.11a and HiperLan2” on page 565 for greater detail.
– WL802DOT11B -See “892.11b/g” on page 568 for greater detail.
– XEVDO -See “1xeV-DO” on page 571 for greater detail.
– XEVDV -See “1xeV-DV” on page 574 for greater detail.
– TDSCdma -See “TD-SCDMA” on page 577 for greater detail.
– NADC -See “NADC” on page 580 for greater detail.
– IDEN -See “iDEN” on page 584 for greater detail.
– DVB -See “DVB” on page 588 for greater detail.
– HIPERLAN2 -See “802.11a and HiperLan2” on page 565 for greater detail.