PSTatistic Subsystem 9
N1911A/1912A P-Series Power Meters Programming Guide 323
PSTatistic:CCDF:MARKer:DELta?
This command is used to retrieve power and probability difference between
marker 2 and marker 1 at any trace the marker is positioned.
Algorithm
Delta = Marker 2 Value - Marker 1 Value
where
Delta is the power difference and probability difference
Syntax
This command is only applicable when P-Series sensors are present and the
following conditions are met:
– Free-run acquisition mode is selected
– NORMal or DOUBle measurement speed setting is chosen
To Next Page
Loading...
