Keysight N1911A

UNIT Subsystem 16
N1911A/1912A P-Series Power Meters Programming Guide 731
UNIT[1]|2|3|4:POWer:RATio <ratio_unit>
This command sets the window/measurement ratio units.
– UNIT1:POWer:RATio sets the ratio measurement units for the upper window/
upper measurement.
– UNIT2:POWer:RATio sets the ratio measurement units for the lower window/
upper measurement.
– UNIT3:POWer:RATio sets the ratio measurement units for the upper window/
lower measurement.
– UNIT4:POWer:RATio sets the ratio measurement units for the lower window/
lower measurement.
Syntax
Parameters
Item Description/Default Range of Values
ratio_unit The ratio measurement unit.
– The default unit is DB
DB
PCT
:RAT
:POW
ratio_unit
Space
?
UNIT
1
2
3
4